|WITH DIGITAL READOUT AND SPC CAPABILITIES TO INSTANTLY MEASURE TOP DIAMETER OF TAPERED HOLES
The BARCOR Electronic
CHAMFER GAGE is a precision instrument designed specifically to measure
the top diameter of chamfers, countersinks, center drills, or tapered
holes. Simply press the Electronic CHAMFER GAGE’s spring loaded
Gaging Plunger into the piece being measured and directly read the size in .0002" or
.005mm with the SAME gage. Or, at the press of a button, change to Comparative
Mode from a known standard.
Like BARCOR's well-known
mechanical counterpart, the Electronic CHAMFER GAGE requires no Setting
Master (Standard) or lookup chart. To “Zero” or “Set”
the gage, just press the base against any flat ground surface and press the "on"
button. Equipped with rechargeable long-life batteries, the gage may also be
powered continuously through its 110 VAC adapter/battery charger or directly
from a printer, PC, data collector, etc.
Over 320 standard BARCOR
Electronic CHAMFER GAGE Models are available, for two angular ranges,
and 90-127°, for both internal as well as external chamfers. The standard
Electronic CHAMFER GAGE is equipped with a hardened tool steel Gaging
Plunger. Optional solid Carbide Plungers with LIFETIME wear guarantee are
Similar in appearance
to BARCOR's popular mechanical CHAMFER GAGE,
BARCOR'S Electronic CHAMFER GAGE is completely self-contained and fully
portable, with no tandem units, attachments, cables or external power required.
The Electronic CHAMFER GAGE features a special indicator designed solely for
chamfer measurements, based on the geometry of the Gaging Plunger. The
indicator’s special 360 Degree rotational bezel allows the user to read in any
position. It also features "Inch/Metric" and "Hold" capabilities, and a high contrast,
easy-to-read, large, LCD Digital Display, for error-free readings.
Full SPC capabilities
make the BARCOR Electronic CHAMFER GAGE compatible with virtually all
brands of data collectors, either directly or through BARCOR'S optional Gage Port. For use in conjunction with a specific data logger,
interface, processor, etc., contact factory for details.
- Similar in size,
weight, & appearance to BARCOR’s
popular mechanical CHAMFER GAGE. Self-Contained and Portable.
Accuracy: ±.0005" for 90° Models; ±.0009” for
127° Models. Repeatability: within ±1 least significant
Modes: Direct Reading as called out on part print; and Plus/Minus
Comparative from a “Zero” established
with Master or verified piece part.
- True, instant, Inch/Metric Switchability to measure the same reading
in either inches or mm with the push of a button.
- No Setting Masters
(Standards) or look-up-charts required. Optional NIST (NBS) traceable
Setting Masters offered.
- Long-Life Batteries
- Can also be powered
continuously through its A/C Adapter or directly from a printer, PC,
data collector, etc.
- AGD Group 2 indicator
has large, easy-to-read, LCD Digital Display, with three modes, dimensional “Hold”, and full 360
Degree Rotational Bezel, for convenient and error-free viewing.
- Full SPC capabilites: compatible with virtually any brand of equipment, directly through Gage Port. Open Collector RS-232 C Serial Type Output
Signal, BCD Parallel or Mitutoyo,
for all of BARCOR’s
320 Models, including Carbide and External Type OD for male tapers.