MEASURES THE FLUSHNESS OF WELDS, RIVETS & SCREW HEADS
Measure the height (or depth) of rivet and screw heads and the flushness of welds; direct
to .0005"... instantly and with great accuracy.
Easily maintain Mil Spec riveting standards of + .005"/-.000" for flushness.
Use whenever flushness, smoothness, and non-interference must be controlled.
Known applications include:
- Rivet and
screw heads, arc welds in aircraft, missile, aerospace, electronic and sheet
metal work Set-up and in-process control of rivet head shaving machines
Control staking and rivet height in office machines and other complex mechanisms
to prevent shearing and interference Measure the timing, movement, and
pressure correlation of valves, hydraulic valve spools, hydraulic cylinders
Use on embossed, stamped, coined, upset, dimpled, and staked parts
- Provides an independent,
unbiased, easily-verified flushness measurement... direct in .001" or .0005"
increments.
- Optional Digital Electronic
with SPC
The gage's three-legged base sits solidly on any surface, flat or curved. On curved surfaces, zero is set at a point immediately next to the point to be measured. The contact tip is then slid onto the fastener or weld... thus the effects of curvature are neutralized. Comes complete with instructions in a fitted, foam-lined storage case... from stock.
MODEL |
EACH
INCREMENT |
1300 |
.001" |
1300-M |
.01 mm |
1350 |
.0005" |
1300-SPC |
.0001"/.005 mm |
|
|